At power-up, the Master-D1 reads the DIP-switch settings. The network mode depends on the GP0 and GP1 position.
|Network mode||GP0||GP1||DIP switch position|
|Static IP 192.168.2.94||OFF||ON|
|Static custom IP||ON||OFF|
|DHCP Server, 192.168.0.1||OFF||OFF|
The BS0 and BS1 positions on the dip switch shall both be ON. These boot-select pins are used in factory programming only.
Use the supplied Ethernet cable to connect the Underwater GPS to a network switch or directly into the host computer.
The host computer connected to the topside unit needs to have an IP-address on the same subnet as set on the Master-D1. For example: If the IP address of the UGPS is 192.168.2.94 the host computer needs to be configured to a different 192.168.2.x address e.g. 192.168.2.100.